Jabiru Owners Group

Welcome to the world of Jabiru

Flap stop pin bush

Discussions on everything airframes.
  • Advertisement

Flap stop pin bush

Postby diablo » Mon Jun 08, 2015 12:05 pm

I am doing these at cost of materials plus shipping to JOG members that post three messages between the 8th and the 15th of June. These are quite expensive from Jabiru.

Jabiru Flight Control Part

Flap Pin
Ref: 3020094
Price: £14.26 (£17.11 Including VAT at 20%) + Shipping

Easy way to tell if you need one is by inspecting your flap position plate. If it is scraped, it is likely that your bush is worn and the retaining steel bolt is rubbing against the aluminium plate. If caught in time (a stitch saves nine), you will only need a bush. If the wear is deep you also need a new plate and repair cost goes up significantly. Replace the bush and the locating 5/16" hex bolt with a Philips head and you will benefit from easy fitting and removal. This is something that your inspector will be checking at permit renewal ...

IMG_0579.JPG
flap position locating bush - White is Jabiru, black is JOG developed (thicker, philips screw head, easier to change and lasts longer)
IMG_0579.JPG (2.26 MiB) Viewed 938 times


Offer valid till the 15th of June.
Sent from my "Electronic Numerical Integrator And Calculator" E-N-I-A-C
User avatar
diablo
Site Admin
Site Admin
 
Posts: 300
Joined: Fri Feb 06, 2015 8:25 pm
Aircraft: Jabiru SK 2200A 1157

Return to Airframe

Who is online

Users browsing this forum: No registered users and 1 guest