Jabiru Owners Group

Welcome to the world of Jabiru

GT Propeller bolts and toque settings

This is a read only forum and contains all the archived posts from jabiruowner.co.uk.
  • Advertisement

Re: GT Propeller bolts and toque settings

Postby Anonymous » Tue Feb 10, 2015 10:15 pm

Posted by: Steve on 09:24:28 12/18/14 Thu

According to Skycraft and a GT prop document on the web, the torque settings on a Jab 2200 should be 16NM for a GT prop.
Anonymous
 

Re: GT Propeller bolts and toque settings

Postby Anonymous » Tue Feb 10, 2015 10:15 pm

Posted by: DL on 11:29:44 12/18/14 Thu

I wanted to point out how belleville washers are fitted in the document ...

it shows various way they can be used and also shows them to be quite a lot larger than what we see on Jabiru's as well as the correct application which in all cases is between two standard (thick) large washers.

Steve is right ... 16NM (NM=Newton Meter) on Jabiru site.

My GT propeller Handbook Reference GT-0830-02 states 16-18NM.

1NM = 0.74 lb/ft

therefore gary has it torquest correctly at 12 lb/ft (11.8 actually) !
Anonymous
 

Re: GT Propeller bolts and toque settings

Postby Anonymous » Tue Feb 10, 2015 10:15 pm

Posted by: Gary on 11:44:32 12/18/14 Thu

Thats a relief then
Thanks
Anonymous
 

Previous

Return to Archive

Who is online

Users browsing this forum: No registered users and 2 guests