Jabiru Owners Group

Welcome to the world of Jabiru

replacing the Honda coil HT lead

Post for help and advice on engines, fuel systems, ignition and engine electrics.
  • Advertisement

replacing the Honda coil HT lead

Postby rendrag » Tue May 22, 2018 9:37 pm

I am trying to contact mr.Turk who I believe wrote an article on how to replace the original copper core HT lead and replace it with a Magnecor lead, can you help.
(the copper core lead is I believe the main cause of radio interference)
Ian Gardner
rendrag
 
Posts: 2
Joined: Fri May 05, 2017 7:08 pm
Aircraft: SAVANNAH VG

Re: replacing the Honda coil HT lead

Postby Garyo » Tue May 29, 2018 6:55 pm

I think the jist of it was to dig out all the glue from the socket in the mag, then the new lead was screwed into a spike in the socket then re epoxy in.
Alternatively you can cut the lead closee to the socket and attach the magecore ht to this
Former Owner of
G-OMER
Jabiru 450 UL
Engine serial 1041
1 CHT sensor on No 4 under plug
No Exhaust temp sensors
No glass panel
No xponder
Microair radio
No bells and whistles
User avatar
Garyo
Site Admin
Site Admin
 
Posts: 323
Images: 4
Joined: Fri Feb 06, 2015 7:52 pm

Re: replacing the Honda coil HT lead

Postby Steevo » Tue May 29, 2018 7:31 pm

Or even easier put braid around the lead and ground the braid.
Jabiru J160 & Jabiru SPL-450
PS Engineering PM3000 Intercom
Funke THT800H OLED/Trig TT22
Funke ATR833 OLED/Dittel KRT2
Flight DataSystems GD-40 CO Monitoring
PoweFlarm Core
PilotAware
Garmin 496 GPS and SkyDemon
MGL Xtreme EMS
TruTrak Autopilot
User avatar
Steevo
Site Admin
Site Admin
 
Posts: 254
Images: 2
Joined: Fri Feb 06, 2015 2:56 pm
Location: Wickford, Essex
Aircraft: Jabiru UL-450


Return to Engines, Ignition, Fuel System and Electrical

Who is online

Users browsing this forum: No registered users and 3 guests